+91-9216242177
info@jabscar.com
+91-9216242177
info@jabscar.com
Pressure Sand Filter is used for removal of suspended solids & turbidity from Water & Wastewater. We, at Jabscar offer Series of filters at a low cost, reliable and efficientway to filter your water.
Our unique design of Pressure Sand filter ensures the maximum utilization of the surface area, lesser pressure drop across the filter bed and effective removal of the impurities.
Jabscar Filters are available in diameters from 0.225 Mts. to 4.0 Mts.(vertically) and in length from 3.0 Mts. mm to 11 Mts. (Horizontally) with flow ratesup to 350M3/Hr. these rugged, pre-engineered, pre-assembled units minimizeinstallation and start-up costs. Whether you require ROfeed process water or filtered water, Jabscar can fulfill applications requirement
Raw water is passed through the pressure sand filter, the filter media (Fine quartz sand) is supported on gravel & pebbles bed of progressively larger sizes. During the filtration cycle the filter bed retains the dirt and suspended particles from the water and accumulates within the filter bed. Clear water can be collected from the outlet of filter.
| Flow | : | 1M3/Hr. - 350 M3/Hr. |
| Inlet TSS | : | Up to 40 Mg/L |
| Inlet Turbidity | : | Up to 30 NTU |
| Filtration Velocity | : | 8 to 12 M3/Hr./M2 |
| Diameter (Vertical Vessel) | : | 0.225 Mts. - 4.0 Mts. |
| Length (Horizontal Vessel) | : | 3.000 Mts. - 11.0 Mts. |
| MOC | : | FRP / Mid Steel / Stainless Steel Coating / lining : Epoxy / FRP / Rubber Lined |
| Filtration Rating | : | Up to 20 Micron |
| Design Code | : | ASME / IS |
| Design Pressure | : | Up to 10 Bar |
| Working Pressure | : | 1.1 to 3.5 Bar |
| Clear Pressure Drop | : | 0.3 bar |
| Top distribution system | : | bell mouth |
| Bottom distribution system | : | Strainer plate or Header & laterals. |